Noble Coil™
High Performance RF Load Coils
for ICP- MS
|
Noble Coil™ High Performance RF Load Coils for ICP- MS
|
|
|||
| |
||||
| Home | Comparison | User Comments | Purchase Directly from Us | Contact Us |
|
|
||||
| The thumbnails presented below are RF power optimization plots of three RF coils. This data is from a PE Elan® 6000. The instrument was fully optimized prior to this test. The test solution is 10ppb Rh in 1% nitric. Only the coils were changed between tests. |
 |
|
 |
| New copper coil | Four month old NOBLE COIL™ | Four month old copper coil |
| Maximum intensity 337,000 cts | Maximum intensity 358,000 cts | Maximum intensity 281,000 cts (note misshapen curve) |
 |
 |
 |
| The four month old NOBLE COIL™
has maintained its original RF coupling efficiency while the four month old
copper coil has lost a significant amount of its RF coupling potential.
In addition, the NOBLE COIL™ maintains its bright surface finish
after four months at 1400w for approximately 16 hours per day
average use. This durable, bright noble metal finish eliminates one
of the major causes of torch and coil destruction - arcing caused by
surface oxidation and scale.
Perkin-Elmer® and Elan® are registered trade marks of the Perkin-Elmer Corporation. Copyright 2006, Analytical Reason, Inc., Salt Lake City, Utah All Rights Reserved
|
